
Add to Cart
Water Treatment 5T UF Ultrafiltration Membrane System
5T UF Ultrafiltration Membrane System , Ultrafiltration Membranes For Water Treatment
Configuration and Controlling
1) Using imported well-known brand USA DOW/ Toray Reverse Osmosis Membranes, with desalination rate more than or equal to 98%, to produce water with high quality and lower cost.
2) On-line product water quality monitoring and controlled by flow meter. Real-time monitoring of water quality to ensure safety of water.
3) RO water treatment plant on-line pressure monitoring and controlled by pressure gauge.
4) RO plant can be automatically controlled with touch screen operation, easy for operation.
5) RO water system flush membranes about 90 seconds automatically. It can protect the membrane and extend its service life.
6) Low voltage protection switch. When the water pressure is low, stop automatically to protect the pump.
7) Offer the customized solution according to feed water quality.
Specification
Raw water test report
|
seawater and brackish water
|
Material
|
SUS 304/ 316/ FRP
|
RO Purified water capacity
|
70T UF+100T RO
|
System recovery
|
60%-70%
|
Desalination ratio
|
97.3%-98%
|
System working Voltage/Power
|
110V / 220V / 240V/380V/450V 24KW
|
Feed water Capacity
|
70T UF+100T RO
|
Outlet Purified water standard
|
TDS<1000PPM ; TDS<2PPM for drinking standard
|
Feature Of Industrial Ultrafiltration System
1) ultra filtration (UF) systems is small footprints and easy operation
2) High degree of automation of ultra filtration (UF) systems
3) Different Molecular substances can be classified and treated
4) UF mineral water treatment is applicable for different kinds of water quality and can be widely used
Function of RO Water Treatment Equipment for Drinking Water
1. General pure water production technique, open-frame design as well as clear working process, easy to maintain and service.
2. Open-frame design, easy to carry and install.
3. With stainless steel water storage tank, can get better ability of decontamination.
4. Active carbon absorbs residue chlorine 100%, to protect RO membranes from damage, also gets rid of color and odor, improve the taste of pure water.
5. Water pressure self-protection to all the pumps, connect the electricity source, open the water input value. When the pressure is lower than the rated voltage, the pump will stop automatically.
6. If the hardness of the original water is too high, it must be connect with a machine making water soft automatically. The softener prevent membranes from fouling and keep the flux of pure water.
7. The RO unit also has flocculant device, to prevent RO membranes from fouling and clogging, metering pump connected with the dosing tank. It is optional to RO machine according to feed water quality.
8. With conductivity monitor on control panel, you can check product water quality at any time.
9. Safe and reliable PLC design. With automatically flush of RO membrane and low-pressure-protecting system, the RO water machine start or stop according to the water level in pure water tank.
for different application.
Ultrafiltration System
1. Import parts over 90%,water conductivity<10μm/cm.
2. Meet GMP Standard.
3. Will be test before shipping.
Ultrafiltration System are used for
1. Electronic industry, semiconductor industry ultrapure water treatment.
2. Chemical industry, pharmaceutical industry pure water treatment.
3. Food, beverage, drinking water, bottled drinking water, sachet/pouch packing pure drinking water treatment.
4. Electroplating and leather industry waste water treatment.
5. Brackish water desalination, sea water desalination, metallurgy and light industry pure water treatment.
6. Cosmetic products, car battery, liquid fertilizer production pure water treatment.
7. Edible cube ice, tube ice etc.
Warranty: One year since the date of installation. If there is any wearing part be broken within the warranty and isn’t caused by un-properly operation, then the Seller would offer the new parts for free.New Model High Efficient Tilting Vacuum Emulsifying Mixer Machine For Cosmetic
Inspection: The buyer will do the machine inspection when the machines are ready.
Machine Installation or Fixing: If Buyer requires Seller’s engineer to install or fix the machine locally in due course, the Buyer should pay the round air ticket cost and arrange the hotel accommodation as well as the means for Seller’s engineer.