Guangdong Morui Environmental Technology Co.,Ltd.
Guangdong Morui Environmental Technology Co.,Ltd.
Add to Cart
High Toughness 0860 Ultrafiltration Membranes For Water Treatment Membrane
UF membrane application
1) RO pre-treatment and post-treatment,raw water includes sea water, surface water,well water and waste water etc.
2) Drinking water supply treatment.
3) Condensate water reuse.
4) Pharmaceutical industry to remove pyrogen.
5) Municipal water,surface water and well water treated for drinking.
6) Waste water deep treated for recycling.
7) Turbidity removal of liquor,removing bacterial and turbidity from fruit wine,grape wine and yellow rice wine.
8) Applied to industries of concentration treatment such as food,beverages,fermentation,milk.
Features
1. The membrane silk is made of PP (polypropylene). With our unique technology, the fiber is modified and enhanced to have high strength and high toughness, so that it can work under a variety of bad conditions;
2. Outer and inner diameter of the membrane silk are 500 and 400um.It is so thin that we can install more silks (about 60 ) to 72 thousand pieces, and the total membrane area is about 60m2) into a UF shell, and suspended solids in the water can quickly plug the cross section even when the silk is broken;
3. The filtration mode is out to in, the water to be treated can flow into the membrane module from either side of it, makingthe worry about wrong installation not necessary. And because of this filtration mode, the pore on the surfaceof membrane silk can shrink during filtering, so it can have a higher filtering precision. And the pore will expand during backwashing, so it can wash away some big particles to clean the membrane at the most. All of these make our product act perfect in working process;
4. Our enhanced modified PP material has great fouling resistant ability, and it can recover its performance by backwash instead of chemical cleaning. It can reduce the damage to the membrane silk and save the cost on chemicals;
The shell is made of UPVC.
Specification
|
inflow (L/h) |
40-120 |
|
material |
PVDF,PVC,PAN |
|
operating pressure(Mpa) |
0.01-0.1 |
|
membrane area(m2) |
51 |
|
highest inflow pressure(Mpa) |
0.8 |
|
operating temperature |
45 ℃ |
|
PH range |
2-11 |
|
Virus removal rate(log) |
6 |
Compared with other systems in this field, it has a lot of advantages as follows:
1. With ingenious and compact design, it takes up a small area and has a high automatic performance.
2. Clean and clear filtration water without the problems of olid smell and getting turbid.
3. Adopting automatic control system, including automatic back-washing, needing no one on duty, saving labor cost, solving the problem effectively of the traditional equipments' complicated operation and invalidation due to the operating or protecting improperly.
4. Stable performance, long life time, low running cost.
5. Environment friendly, no second pollution.
6. More than 90% water reuse rate, no natural wastage...