Guangdong Morui Environmental Technology Co.,Ltd.
Guangdong Morui Environmental Technology Co.,Ltd.
Add to Cart
Water Purification Plant Ro Uf Membrane Ultrafiltration Membrane Sheet
Application
1. Recycle of iindustrial wastewater(papermaking wastewater,printing and dying wastewater,petrochemical wastewater,steel and iron wastewater,chemical insudtry wastewater).
2. Pretreatment for NF and RO in landfill leachate treatment;
3. Electrophoretic paint treatment; liquid concentration, separation, clarification and filtration
Product characteristics
Ⅰ Membrane tube has high strength and permanent cracking (single tube can carry a load of more than 500N).
Ⅱ Membrane module withstands high pressure and allows 0.3 MPa gas-liquid mixed scrubbing.
Ⅲ Membrane module has excellent damage resistance and can withstand the friction of various hard suspensions in water.
Ⅳ Membrane module has excellent internal structure. Open sewage drainage channel design is adopted to achieve more thorough cleaning and backwashing effects.
Ⅴ Membrane module has good adaptability (wide influent conditions, suitable for solid-liquid separation of various wastewater)
Ⅵ Good chemical stability (membrane module after high concentration of acid-base chemical cleaning, performance remains unchanged, long service life)
Features
1. The membrane silk is made of PP (polypropylene). With our unique technology, the fiber is modified and enhanced to have high strength and high toughness, so that it can work under a variety of bad conditions;
2. Outer and inner diameter of the membrane silk are 500 and 400um.It is so thin that we can install more silks (about 60 ) to 72 thousand pieces, and the total membrane area is about 60m2) into a UF shell, and suspended solids in the water can quickly plug the cross section even when the silk is broken;
3. The filtration mode is out to in, the water to be treated can flow into the membrane module from either side of it, makingthe worry about wrong installation not necessary. And because of this filtration mode, the pore on the surfaceof membrane silk can shrink during filtering, so it can have a higher filtering precision. And the pore will expand during backwashing, so it can wash away some big particles to clean the membrane at the most. All of these make our product act perfect in working process;
4. Our enhanced modified PP material has great fouling resistant ability, and it can recover its performance by backwash instead of chemical cleaning. It can reduce the damage to the membrane silk and save the cost on chemicals;
The shell is made of UPVC.
Specification
|
inflow (L/min) |
303 |
|
material |
PVDF |
|
operating pressure(Mpa) |
0.05-0.6 |
|
membrane area(m2) |
30 |
|
highest inflow pressure(Mpa) |
0.8 |
|
operating temperature |
45 ℃ |
|
PH range |
2-11 |
|
Virus removal rate(log) |
6 |
Compared with other systems in this field, it has a lot of advantages as follows:
1. With ingenious and compact design, it takes up a small area and has a high automatic performance.
2. Clean and clear filtration water without the problems of olid smell and getting turbid.
3. Adopting automatic control system, including automatic back-washing, needing no one on duty, saving labor cost, solving the problem effectively of the traditional equipments' complicated operation and invalidation due to the operating or protecting improperly.
4. Stable performance, long life time, low running cost.
5. Environment friendly, no second pollution.
6. More than 90% water reuse rate, no natural wastage...